Solid square pad
One flat side and one fine-grid side, without a center hole as standard. Optional drilling is available to suit the installation, with hole position and diameter specified by order.
Rubber vibration isolation · Custom molded componentsStart with a drawing · Sample · Dimensional requirement
S series · Select by structure
Square Rubber Isolation Pads
Square rubber pads offer solid and center-hole starting points for equipment support. Confirm the footprint, thickness, surface contact, installation interface and load before selecting a final specification.
- PRODUCT FAMILY
- S-01 / S-02
- ORDER BASIS
- Drawing · dimensions · application
Choose the structure first
Product family overview
Use the closest structure as a starting point. Final dimensions, material and interface follow the confirmed requirement.
Center-hole square pad
A square pad with a central opening. Specify the hole and mating fastener or locating feature.
Catalog specifications
Dimensions, material & hardness
All dimensions are in millimeters (mm). Listed footprint and thickness options do not imply that every combination is available. Confirm the exact combination, tolerances and availability when ordering. Load capacity requires application-specific review.
S-01 · L × W × H
Catalog square-footprint options: 100, 150, 200 and 300 mm, with thickness options of 20, 30 and 50 mm. For 600 × 600 mm pads, listed thicknesses are 10, 20, 30, 40 and 50 mm.
S-01 · Other configurations
Selected 250 and 300 mm sizes are available with thickness up to 100 mm. Optional drilling follows the specified installation requirement. Confirm the exact size and hole pattern.
S-02 · L × W × H × Ød
Catalog references: 50 × 50 × 20 mm with a Ø10 mm through-hole; 71 × 71 × 10 mm with a Ø12 mm through-hole. Other square sizes and hole diameters are available by request.
Rubber material
Standard: synthetic rubber. Optional materials: NR (natural rubber), NBR (nitrile rubber) and EPDM. Specify exposure conditions for compound selection.
Hardness · Shore A
Typical hardness: 65 ± 5 Shore A. Custom hardness: 40–90 Shore A, subject to material and application requirements.
Customization
Dimensions, material, hardness and color can be specified by order. For S-02, confirm the center-hole diameter and mating fixing or locating feature.
For engineering review
Send the information that affects fit and selection
Footprint & thickness
Provide length, width and thickness, plus any dimensional or tolerance requirements.
Hole & contact surface
For a center-hole pad, specify the opening and mating hardware; describe any required surface pattern.
Load per pad
Share equipment weight, number of support points and expected load distribution.
Application
Describe the machine, mounting position and the cushioning or isolation concern.
Environment & material
Note relevant temperature, oil, weather or chemical exposure and any known material or hardness requirement.
Quantity
State trial and production quantities, including packing needs if known.
Application starting points
Where this family may be considered
Suitability depends on the installation, operating conditions and the information supplied for review.
- 01HVAC units and equipment feet with square support points
- 02Pumps and compressors, subject to load and operating-condition review
- 03Motors and general machinery requiring support and cushioning
- 04Made-to-order square-pad requirements based on a drawing or sample
Start with the available information
Have a drawing, sample or installation dimensions?
Share the requirement for a practical review. If the exact product family is unclear, choose “Not sure — need engineering review” in the inquiry form.
Emailsales@jcxsrubber.com
WhatsApp / Tel+86 187 5868 5608
Address
1F, Building 1, Chuangye Industrial Park,
No. 13 Hongsan Avenue, Hongchou Town,
Tiantai County, Taizhou, Zhejiang, China