Product comparison & purchasing guide

Rubber Vibration Pads vs. Rubber Mounts: How to Choose

Start with how the equipment connects to its supporting surface. Then compare the available space, dimensions and operating conditions to identify which product family to discuss.

This comparison covers Jincheng Rubber pad and mount structures. It helps you prepare an inquiry; final suitability and performance require an application review.

Discuss your installation

What is different?

For this range, pads are compared by their contact surfaces, while mounts are compared by their end connections. Neither a surface pattern nor an interface code is a load or isolation rating.

Rubber vibration pads and mounts: purchasing requirements
What to compare	Rubber vibration pads	Rubber vibration mounts
Connection to review	The pad sits between contact surfaces. Specify any cut lines, holes or other fixing requirements.	Match the equipment and support connections: male studs, female threads or a plain rubber end.
Product structures	A-01, A-02 and B raised-dot formats; C-01 and C-02 ribbed formats; D deep-groove ribbed format.	VE, VV, DD, DE and VD identify the combinations of end interfaces.
Dimensions to provide	Length, width, total thickness, surface profile, cutting requirements and tolerances.	Rubber diameter or footprint, rubber height, overall height, thread size and pitch, stud length or usable thread depth.
Installation information	Available contact area, support-point positions and the equipment-to-surface arrangement.	Mating parts, hole positions, clearance, mount positions and installation orientation.
Material and hardness	Common reference: synthetic rubber, 65 ± 5 Shore A. Custom requirements are confirmed by order.	Confirm material and Shore A hardness for the specific order. Pad hardness is not a mount specification.
Performance review	Provide equipment weight, load distribution and the cushioning or vibration concern.	Provide load per mount if known, load direction and equipment speed or excitation information.

Allowable load, durability and vibration-isolation performance depend on the actual design and operating conditions. A larger pad, a threaded connection or the term “heavy-duty” alone does not establish a numerical performance rating.

Which family should you review first?

Review pads for a contact-surface requirement

If your drawing calls for a rubber pad between the equipment and its supporting surface, compare the footprint, total thickness and surface structure. Include any cutting or fixing details.

View rubber anti-vibration pads →

Ask about pads

Review mounts for defined end connections

If the installation calls for studs or threaded holes, compare the connections at both ends. Some mount structures have a plain rubber face at one end, so check the complete mating arrangement.

View rubber vibration mounts →

Ask about mounts

If you are replacing an existing part, send its drawing, specification or sample. Similar appearance does not confirm equivalent performance, and pads and mounts should not be treated as interchangeable solely on this comparison.

Information needed for either product family

Installation: equipment type, mounting arrangement, clear photos or a drawing, and available space.
Load: equipment weight, support-point count and positions, expected load distribution and load direction.
Operation: the vibration or movement concern, equipment speed or excitation frequency if known, and relevant temperature, oil, weather or chemical exposure.
Specification: dimensions, tolerances, material and hardness requirements; include an existing sample or specification when available.
Purchase: trial and production quantities, packing requirements and delivery destination.

Do not assume that every support point carries an equal share of the equipment weight. Include the actual arrangement so it can be reviewed. Samples, minimum quantities and lead times are confirmed for the request.

Send a drawing or application details

Common comparison questions

Which product gives better vibration isolation?

There is no universal answer from the product-family name. Selection requires the load, rubber properties, geometry, installation and excitation conditions to be reviewed together.

Can I use the pad hardness for a threaded mount?

No. The common pad reference is 65 ± 5 Shore A. Mount material and hardness must be confirmed separately for the order.

What should I send if I do not know which family I need?

Send the equipment type, installation photographs or drawing, available dimensions, weight, support arrangement and the problem you want to address. Include an existing part if available.

Continue with the detailed selection guides

Rubber pad selection

Compare six structures, catalog dimension examples, measurement steps and the quotation checklist.

Read the pad selection guide →

Rubber mount selection

Compare five interfaces and check rubber dimensions, thread details and installation requirements.

Read the mount selection guide →

Prepare your quotation request

Organize drawings, specifications, quantities and delivery requirements with the RFQ checklist and email template.

Rubber product RFQ checklist and email template →